Adhesives
& technical glues

Apronor >
Within our range of products, adhesives and technical glues are at your disposal.
Resistant to high temperatures, they are characterized for the former by their excellent adhesion to different surfaces and for the latter by their thermal stability. They are suitable for many applications, in construction and industry. Ready to use, our technical adhesives are particularly intended for the assembly of materials (including our textiles) and for the production of joints. As for the adhesives, they can be used, among other things, on insulating panels and electric cables.
High temperature glue & sealant
Apronor offers a range of high temperature resistant adhesives and sealants suitable for insulation under high temperature conditions.
Aprosil60G : refractory glue
APROSIL60G glue is a very adhesive refractory glue that can be applied in the cold. Placed on one or two surfaces it allows a fixed contact until a good adhesion is obtained. When the glue is dry, the thermal stability is very high, since it shows no destruction, but increased adhesion due to its content of sodium silicate.
- Thermal stability
- Good resistance to high temperatures
- Resistance and long lasting
- Fire-rated expansion joint
- Joint insulation panels
- Bonding of textiles or insulating fibrous materials
- Technical construction work
STORAGE AND CONSERVATION
- Storage: Store between 10 and 30 °C
- Storage: 2 years in airtight closed packaging
REGULATIONS AND CLASSIFICATION
- Corrosive product, contains sodium silicate
PRÉCAUTIONS D’EMPLOI
- Avoid contact with skin and eyes
- Wear safety gloves, eye protection and work clothing
For more information, see our safety data sheet
PHYSICAL AND CHEMICAL CHARACTERISTICS
Aspect | Drying | Density | Dry extract | Viscosity |
Gray viscous liquid, ready to use | 1-3 hours | 1.50 / 1.60 | 60-65% by weight | 20,000-30,000 Cps at 20 rpm |
Aprosil70G: refractory glue thick version
APROSIL70G sealant is applied to one or two surfaces and allows fixed contact until good adhesion is obtained. When the glue is dry, the thermal stability is very high because it shows no destruction, but increased adhesion due to its sodium silicate content.
- Thermal stability
- Good resistance to high temperatures
- Resistance and long lastin
- Fire-rated expansion joint
- Joint insulation panels
- Bonding of textiles or insulating fibrous material
- Technical construction work
STORAGE AND CONSERVATION
- Storage: store between 10 and 30°C
- Conservation: 2 years in airtight closed packaging
REGULATIONS AND CLASSIFICATION
- Corrosive product, contains sodium silicate
PRECAUTIONS FOR USE
- Avoid contact with skin and eyes
- Wear safety gloves, eye protection and work clothing
For more information, see our safety data sheet
PHYSICAL AND CHEMICAL CHARACTERISTICS
Aspect | Drying | Density | Dry extract | Viscosity |
Gray viscous liquid, ready to use | 1-3 hours | 1.50 / 1.60 | 60-65% by weight | 180,000 Cps at 20 rpm |
Apronor offers a range of adhesive tapes made up of acrylic in aqueous phase or in solvent phase resistant to UV rays, extreme temperatures, humidity etc. Our adhesive tapes are commonly used for installation and repair of ventilation ducts, to cover pipes and heating ducts.
Single-sided aluminum tape with protector
Single-sided aluminum tape with Apronor protector exhibits good adhesion to many substrates and adhesion in most applications.
- Excellent resistance to UV and aging
- Good temperature resistance
- Adaptable to most surfaces
- Assembly of ducts
- Insulating panels
- Electric cable
- Thermal insulation
Width (mm) | Length (mm) | T ° (C°) | Adhesive mass | Fire classification |
50 | 50 | 100° | Water-based acrylic | M1 |
75 | 50 | 100° | Water-based acrylic | M1 |
100 | 50 | 100° | Water-based acrylic | M1 |
Width (mm) | Length (mm) | T ° (C°) | Adhesive mass | Fire classification |
50 | 50 | 100° | Water-based acrylic | M1 |
63 | 50 | 100° | Water-based acrylic | M1 |
75 | 50 | 100° | Water-based acrylic | M1 |
100 | 50 | 100° | Water-based acrylic | M1 |
Width (mm) | Length (mm) | T ° (C°) | Adhesive mass | Fire classification |
50 | 50 | 100° | Acrylique base aqueuse | M1 |
High adhesiveness. Excellent resistance to humidity. Long lasting application
Width (mm) | Length (mm) | T ° (C°) | Adhesive mass | Fire classification |
50 | 50 | 100° | Solvent-based acrylic | NC |
Need technical glues and adhesives?